2008

Import data from Autodesk Inventor
Professional Cable & Harness
From the XML export from Autodesk Inventor Professional (AIP) into AutoCAD
Electrical, you can select from a list of connectors defined in the export, and
then place the connectors onto a 2D drawing file. After the connectors are
inserted onto the drawing, click Wire on the Connector Selection dialog box
to place all wire connections to all components on the drawing file. AutoCAD
Electrical parses the file data to determine all wire From and To connections.
Once the wiring information is determined, the wires are routed making sure
to miss existing geometry on the drawing. The wire insertion tool finds the
best possible route with the fewest amount of wire loops in between the
connection reducing the requirement on gap pointers. The wires are connected
in the appropriate position on the connector representation.
As the wires are inserted, the wire types in the XML file are applied to the
Wire Layer in the AutoCAD Electrical drawing. Additionally, wire numbers
and cable marker symbols are inserted onto the drawing. The wire numbers
are inserted following the drawing's wire number setting (above wire, in-line
with wire, or below wire). The first cable marker listed in the XML file is
inserted as the parent and the subsequent markers of the same reference
designator (Cable Tag) are inserted as children.
Certain Autodesk Inventor Professional wire property names need to be
maintained inside of AutoCAD Electrical. You must make sure that your
column header names (set in the Rename User Columns dialog box) match
the property names coming out of the Autodesk Inventor Professional XML
export (set in the Autodesk Inventor Custom Properties dialog box). For
example, the property CORE SIZE maps to a user column of the Create/Edit
Wire Type dialog box if there is a column header defined as "CORE SIZE." If
mapping does not exist then the data is not maintained inside of your
AutoCAD Electrical drawing file.
662 | Chapter 10 Point-to-Point Wiring Tools