2008

Defines the specific layer for the table to be placed
on when inserted. On the Select Table Layer dialog
Layer
box, select the layer name from the list of layers on
the active drawing and click OK. The selections are
stored in the table when it is inserted and the next
time the terminal is edited, the settings are read
back in.
Defines a title for the table. Enter a title, select from
a list of variables or use a combination of both.
Table Title
When selecting from the list, the selection is added
to the end of the string if one exists in the edit box.
Browses for any saved settings (in a *.tsl file) that
you previously created.
Browse
Saves the settings to an external file (with extension
*.tsl) that you can later reuse. The default folder
Save As
location is the User folder in the Documents and
Settings location.
Uses the default settings for creating the table.Default
Specifies the exact location of the table for each
drawing being created.
Section Placement
Creates a new drawing for each table and adds the
drawings to the active project.
Insert in New Drawing
Updates an existing table that was already placed
on a drawing in place. If the terminal strip exists in
Rebuild in Existing Drawing
the project, it is located, deleted, and rebuilt in
place without prompting you to select a new inser-
tion point.
628 | Chapter 9 Terminal Tools