2008

Renumbers all, or a partial list, of terminal blocks from
the active terminal strip. On the Renumber Terminal
Renumber Terminals
Strip dialog box, specify the new starting number and
other options for renumbering the terminal.
NOTE You cannot renumber a terminal that uses a
wire number as its terminal number. Additionally,
duplicate terminal numbers are not restricted.
Moves an entire terminal (including all levels and any
extra terminals created due to wiring constraints) on
Move Terminal
the terminal strip. You can move the terminal block
up or down one row in the listing or manually pick a
new position on the terminal strip listing.
Spare
Inserts spare terminal blocks on the active terminal
strip. Use the Insert Spare Terminal dialog box to
Insert Spare Terminal
define a terminal block number or name, specify the
number of spares to be inserted, and to insert the
spare terminals above or below the highlighted ter-
minal. You can add up to 10,000 spare terminals into
the terminal block.
NOTE Spare terminal assignments are temporary for
the current session of the Terminal Strip Editor. Place
the graphical terminal strip layout on the drawing
during the current session if you want to keep the
spare terminal assignments.
Inserts one or more accessories (such as terminal end
barriers or partitions) into the terminal strip.
Insert Accessory
NOTE Accessory terminal assignments are temporary
for the current session of the Terminal Strip Editor.
Place the graphical terminal strip layout on the draw-
ing during the current session if you want to keep the
accessory terminal assignments.
Use the terminal strip editor | 597