2008

You can associate a schematic and panel terminal automatically using either
the Insert Panel Terminal from Schematic tool or the Insert Schematic Terminal
from Panel tool. In the case of multi-level terminals, the Insert Panel Terminal
from Schematic tool shows only one terminal for insertion regardless of how
many schematic terminal symbols/levels there are for that multi-level block.
The Insert Schematic Terminal from Panel tool shows one terminal for each
level for insertion.
NOTE Panel terminals inserted by the Terminal Strip Editor are automatically
associated to the schematic representation.
Additionally, you can click the Components ➤ Terminals ➤ Associate
Terminals tool to select terminals to associate or click Add/Modify on the
Panel Layout - Terminal Insert/Edit dialog box to add the panel terminal to
an association with a schematic terminal on any drawing in the project.
Associate terminals
Use the Associate Terminals tool to associate two ore more terminal symbols
together. Associating schematic terminals combines the terminals into a single
terminal block property definition. The number of schematic terminals that
can be combined is limited to the number of levels defined for the block
properties.
570 | Chapter 9 Terminal Tools