2008

Moves the selected components to the Direct-to-
Terminal Secondary Sequences list along with a
Add
copy of the selected terminal. You must select the
components and terminal to sequence together for
this button to be available.
If you select multiple components to daisy-chain
to the terminal (by holding CTRL key down), the
first selected component displays ties directly to
the terminal.
(available only when an entry in the sequence is
highlighted) Removes the selected sequencing from
Reset
the Direct-to-Terminal Secondary Sequences list.
The component is moved back to the Wire Connec-
tion Sequence list.
Indicates whether the component is undefined (-),
reported on the internal side of the terminal (I) or
Connection
reported on the external side of the terminal (E). If
selected, an I or E displays in the PD1 or PD2
column (Point Description) of the Wire From/To
report.
Updates the wire connectivity database (the
WFRM2ALL table) with wire connection information
from any out-of-date files.
Freshen
NOTE If all drawings are up-to-date, this button is
disabled. If not, the button is enabled and the count
of out-of-date drawings displays next to the button.
Removes the wire connection sequence information
from a wire network. This consists of Xdata assign-
Remove All
ments on component wire connection attributes
and optional Xdata assignments on terminal sym-
bols if any Direct-to-Terminal sequences are
defined.
Applies the dialog’s wire connection sequence in-
formation in the form of Xdata to the wire connec-
OK-new
tion points and terminals of the selected wire net-
Control from/to report connection sequencing | 535