2008

AutoCAD Electrical automatically hides wire numbers when the wire number
is on the same network as a terminal symbol that carries a copy of the wire
number (WIRENO attribute). There may be times when you want to manually
hide or unhide wire number(s).
1 Click the arrow on the Edit Wire Number tool to access the
Hide Wire Numbers tool.
2 Click the Hide Wire Numbers tool.
3 Select a wire number or the wire it is associated to. AutoCAD
Electrical moves the wire number to a special hide layer and
the number is no longer visible on the screen.
The new hide layer is created from the wire number layer name
with a "_HIDE" suffix. For example, if the wire number text
layer is called WIRENO then the hide layer name is called
"WIRENO_HIDE". The layer is created automatically when
needed and you are asked if you want to freeze this layer.
Unhide wire numbers
1 Click the arrow on the Edit Wire Number tool to access the
Unhide Wire Numbers tool.
2 Click the Unhide Wire Numbers tool.
3 Select a wire number or the wire the hidden number is associ-
ated to.
AutoCAD Electrical moves the wire number out of the hide
layer and the number is visible on the screen.
X zones setup
522 | Chapter 8 Wire/Wire Number Tools