2008

Defines spacing between the inline wire number and the wire it-
self.
Gap Setup
Places the wire number below the physical wire.Below Wire
Specifies to insert the wire number tags the specified offset dis-
tance.
Offset
Specifies to insert the wire number tags in the center of each wire
segment.
Centered
Specifies a fixed, user-defined offset distance from the left or top
of the first wire segment found on the wire network.
Offset Distance
(This option is unavailable for in-line wire numbers.) AutoCAD
Electrical places wire numbers on leaders when it determines that
Leaders
the wire number text bumps into something (it does not check
if the leader itself will overlay another object). Select the method
for inserting new wire numbers as leaders: As Required, Always,
or Never.
NOTE This change does not affect wire numbers that are already
present on the drawing.
Modify Wire Numbers
Increment wire numbers
You can force new incremental wire numbers (as opposed to line referenced
numbers) to increment by more than one during insertion.
In the Drawing Properties dialog box, click the Wire Numbers tab. In the Wire
Number Format section, select Sequential and set the increment value. If you
want this increment value to be your standard for all new drawings, follow
the same procedure in the Project Properties ➤ Wire Numbers dialog box.
Modify Wire Numbers | 519