2008

Updates the related line reference numbers,
cross-reference text, device tagging, and signal
Project-Wide Update/Re-
tag
reference updates on the selected drawing files
inside of the active project.
Configures the display options. There are 10
values that can be associated with the drawings
Drawing List Display Con-
figuration
listed so you can display the information based
on your requirements.
Batch plots one or more drawings in the active
project.
Publish/Plot
Projects
Displays all the open projects in a list. You can have as many projects open as you need, but only
one project can be active at a time. The active project appears in bold text and is always found at
the top of the list. Right-click the project name to display the following project editing options:
Edits the existing project descriptions. Displays unlimited lines describ-
ing the project. Descriptions can then be included in report headers
and title blocks.
Descriptions
Automates updating title block information for the active drawing or
for the entire project drawing set.
Title Block Update
Generates a report that lists project drawing information from the
title blocks such as drawing descriptions, section, and file names.
Drawing List Report
On the Drawing List Report dialog box, select to run a new report,
redisplay the previously-run report or select a format .set file to use
for the report.
Creates a new drawing file and adds it to the active project.New Drawing
Adds one or more drawings to the active project. When prompted,
specify whether to apply the project default values to the drawing
settings (in the WD_M block definition).
Add Drawings
Overview of projects | 41