2008

Reposition Wire Numbers
Scoot wire numbers
If you want to move a wire number along its wire segment, use Scoot and pick
right on the wire number.
1 Click the Scoot tool.
2 Select the wire number to slide along its connected wires or
select the wire segment itself to scoot the entire wire, including
the components, along the bus. You can scoot an entire rung
up or down. A rectangle drawn in temporary graphics indicates
the selected items.
3 Move your cursor to the desired position and click your mouse
button.
The items scoot and reconnect.
Move a wire number
If you want to move an existing wire number from one segment of the network
to another, use the Move Wire Number command.
1 Click the arrow on the Edit Wire Number tool to access the
Move Wire Number tool.
2 Click the Move Wire Number tool.
3 Select the wire segment where you want the wire number re-
positioned (you don't have to first pick on the existing wire
number).
The wire number automatically moves to the selected position.
Rotate a wire number
Reposition Wire Numbers | 511