2008

Fixing a wire number means that the wire number tag is left unchanged if
later processed or reprocessed by the automatic wire numbering utility.
1 Click the Edit Wire Number tool.
2 Select a wire or select an existing wire number. If a wire number
exists, the Modify/Fix/Unfix dialog box displays. However, if
a wire number doesn't exist on the selected wire, the Insert
Wire Number dialog box displays.
3 Edit the wire number or enter a new wire number. If you are
inserting a wire number, use the arrows or click Pick to select
the appropriate wire number. Pick speeds up the task if you
have a number of special wire numbers to manually edit.
4 Select to make the wire number visible or hidden.
5 If you want the wire number to be fixed, select Fixed and click
OK. If the wire number is already fixed and you want to turn
it back into a regular wire number, clear the check box and
click OK.
Fix all wire numbers
There may be times when you want to fix all or many wire numbers on a
drawing at their current values. Use the Fix Wire Numbers tool and identify
all of the wiring you want AutoCAD Electrical to mark as fixed.
1 Click the arrow on the Edit Wire Number tool to access the
Fix Wire Numbers tool.
2 Click the Fix Wire Numbers tool.
3 Select a wire number or component to fix.
4 Right-click when you are done selecting the wires. You can
check whether the wire is fixed by clicking the Edit Wire
Number tool, selecting the wire, and reviewing the dialog box.
Fix/unfix all wire numbers project-wide
Fix Wire Numbering | 507