2008

Defines spacing between the inline wire number and the wire it-
self.
Gap Setup
Places the wire number below the physical wire.Below Wire
Specifies to insert the wire number tags the specified offset dis-
tance.
Offset
Specifies to insert the wire number tags in the center of each wire
segment.
Centered
Specifies a fixed, user-defined offset distance from the left or top
of the first wire segment found on the wire network.
Offset Distance
(This option is unavailable for in-line wire numbers.) AutoCAD
Electrical places wire numbers on leaders when it determines that
Leaders
the wire number text bumps into something (it does not check
if the leader itself will overlay another object). Select the method
for inserting new wire numbers as leaders: As Required, Always,
or Never.
NOTE This change does not affect wire numbers that are already
present on the drawing.
Project properties: wire numbers tab
Modify your project default settings for wire numbers. All information defined
in this tab is saved to the project definition file as project defaults and settings
Access:
Click the Project Manager tool. In the Project Manager, right-click on the project
name and select Properties.
From the Projects menu, select Project ➤ Project Manager. In the Project
Manager, right-click on the project name and select Properties.
496 | Chapter 8 Wire/Wire Number Tools