2008

Remove wire gaps
Use the Delete Wire Gap command if a gap/loop is no longer needed in an
existing wire.
1 Click the arrow on the Insert Wire tool to access the Delete
Wire Gap tool.
2 Click the Delete Wire Gap tool.
3 Select the wire segments near the unneeded gaps.
The gap is removed from the second wire.
Flip wire gaps
Use the Flip Gap command to flip the gap to the other wire.
1 Click the arrow on the Insert Wire tool to access the Flip Wire
Gap tool.
2 Click the Flip Wire Gap tool.
3 Select the wire that has the gap/loops to flip. You can also
window the wires containing the gaps to flip by pressing a W,
then windowing the wires.
AutoCAD Electrical makes the gapped wire solid and flips the
gap/loop to the crossing wires.
Define and insert new ladders
Insert new ladder
474 | Chapter 8 Wire/Wire Number Tools