2008

Manipulate wire gaps
Insert wire gaps
AutoCAD Electrical automatically inserts a gap/loop when a new wire crosses
another. Under some conditions you may need to manually add a loop gap
at the point of two crossing lines.
1 Click the arrow on the Insert Wire tool to access the Insert
Wire Gap tool.
2 Click the Insert Wire Gap tool.
3 Select the wire to remain solid.
4 Select the crossing wire to have the gap.
The gap inserts into the second wire.
NOTE You can turn off the automatic gap/loop feature by selecting Solid in the
Wiring Style section of the Drawing Properties ➤ Style dialog box.
Wire Gaps | 473