2008

marker. Once you insert a location code, a location mark symbol can be
associated to it and the component.
1 Click the Location Symbols tool.
2 Select a component to add the symbol to and press Enter.
If a location code is not associated to the component, the Add
Location to Component dialog box displays.
3 Specify the location code by typing it, clicking on component
that carries the location value, or by selecting from a list of
location codes used on the drawing or in the project.
4 Click OK.
Insert a location mark symbol
1 Click the Location Symbols tool.
2 Select a component to add the symbol to and press Enter.
3 From the Location Symbols dialog box, select the symbol to
associate with the component and click OK.
The attribute text turns to invisible and the location symbol
inserts at its location.
You can reposition the location marks with the AutoCAD Move command.
If you scoot the symbol, the mark moves with it.
NOTE You cannot assign the same mark to two different locations.
Substitute location mark symbols for text location codes | 419