2008

Fixed/unfix component tag
Use this tool to mark a component tag as fixed. The tag is unaffected if the
drawing is later reprocessed by a Retag command.
Access:
Click the arrow on the Edit Component tool to access the Fix/UnFix Component
Tag tool.
From the Components menu, select Component Tagging ➤ Fix/UnFix Com-
ponent Tag.
Select whether to force selected tags to fixed, force selected tags to unfixed,
or switch a tag between being fixed or unfixed.
AutoCAD Electrical changes the component's attribute to a fixed layer as
defined in the Define Layers dialog box.
Retag components
Run the AutoCAD Electrical Retag when something changes on your drawing
or project that affects the component tags. This can include revising the ladder
line reference numbers or changing the tag format. Retag redoes each selected
primary component tag, and then updates the related secondary components.
You can select to update a single component, a group of components, a
drawing, drawings within your project, or the entire project. The Tag format
is set up on the Project Properties ➤ Components or Drawing Properties ➤
Components dialog box.
Access:
Click the Retag Components tool.
From the Components menu, select Component Tagging ➤ Retag Compon-
ents.
Decide if you want to run the component retag across selected components,
the active drawing, or the entire project.
Retag components | 413