2008

3 After you select the terminals, press Enter and the dialog displays.
Notice that the selected terminals are highlighted in the list.
4 Click Add to finish defining the jumper.
Change an existing jumper assignment
1 Select Components ➤ Component Miscellaneous ➤ Add/Edit Internal
Jumper.
2 Select the terminal from the list on the right.
Once selected, the terminals that are part of this jumper assignment are
highlighted on the terminal list.
3 Reselect the terminals to be jumpered, using the Shift and CTRL keys as
needed.
4 Click Update once the appropriate terminals are highlighted.
Wire jumpers
You can add, change, or delete internal jumpers on a selected component.
When wire numbers are inserted, these internal jumpers are read and wire
numbers are assigned accordingly.
If you select to jumper two pins on a component together, an alert displays
indicating that internal jumpering will cause a conflict with the existing wire
number assignments. If you click Continue, an internal jumper inserts between
the two pins on the component; you need to rerun the Insert Wire Numbers
tool to reconcile these two different wire numbers now jumpered together. If
you click Cancel, the internal jumper data is not inserted.
Access:
Click the arrow on the Edit Component tool to access the Add/Edit Internal
Jumper tool.
Click Components ➤ Component Miscellaneous ➤ Add/Edit Internal Jumper.
Adds an internal jumper assignment.Add
Changes an existing jumper assignment.Update
Define wire jumpers | 397