2008

Example where a single symbol makes up the Form C contact
The common pin is on the right-hand side next to the referencing column
and displays in the P2 column of the table.
IEC
JIC
Table cross-reference format setup
This format displays cross-referencing in a table object that automatically gets
updated in real time, so you can define the columns to display. To display
component cross-referencing in a table, you must select a predefined table
style and define the column labels to display.
If new contacts are added to the component, the cross-referencing table
automatically updates. The table location is based on cross-reference attributes,
but you can move the table to any location on the drawing and the table
remains in the new position.
NOTE If you change the table setup once a table has been inserted onto the
drawing, you must run the Component Cross-Reference tool to update the table.
Access:
Click the Project Manager tool. In the Project Manager, right-click the project
or drawing name, and select Properties. Click the Cross-References tab. In the
component Cross-Reference Display section, select Table Format, and click
Setup.
From the Projects menu, select Project ➤ Project Manager. In the Project
Manager, right-click the project or drawing name, and select Properties. Click
374 | Chapter 6 Component Tools