2008

To set the table title, select the allowable replaceable parameter
entry from the selection list, enter the replaceable parameter
to use, or enter text for the table title.
7 Click OK.
If you selected to use the Table Format style, the table location
is based on the cross reference attribute position, but you can
move the table to any location on the drawing and the table
will remain in the new position for that symbol.
Cross-reference component override
You can define components to have different cross-referencing styles. The
settings specified using this tool override the drawing properties. Component
overrides are copied when the component is copied; similarly they are applied
to multiple inserts of the same component.
Access:
Click the arrow on the Component Cross-Reference tool to access the Copy/Add
Component Override tool.
From the Components menu, select Cross-Reference ➤ Copy/Add Component
Override.
NOTE You can also access this by selecting Components ➤ Insert Component.
Select the component type to insert and specify the insertion point on the drawing.
In the Insert/Edit Component dialog box, Cross-Reference section, select
Component override and click Setup.
Select the component with settings to copy or override.
Defines the cross-reference annotation format. One
replaceable parameter, %N, must always be part of
Cross-Reference Format
the cross-reference format string. A typical format
string might be just the %N parameter. Use the up-
per section for on-drawing references and the bottom
section for off-drawing references. You can use the
same format for both.
Overview of cross-reference settings | 365