2008

TIP To set display settings for a specific component that are different than the
drawing, use the Copy/Add Component Override tool.
1 Click the Project Manager tool.
2 In the Project Manager, right-click the project or drawing
name, and select Properties.
NOTE Selecting the project applies changes to the project defin-
ition file and not the drawing. You must later apply the settings
to drawings to see display changes.
3 Click the Cross-References tab. In the Component Cross-Refer-
ence Display section, select Text, Graphical, or Table Format
and click Setup.
■ Text Format: Displays cross-referencing as text with any user-defined
string as a separator between references on the same attribute.
■ Graphical Format: Displays cross-referencing using the AutoCAD
Electrical graphical font or using contact mapping edit boxes while
displaying each reference on a new line.
■ Table Format: Displays cross-referencing in a table object so you can
define the columns to display.
4 Specify the format for the cross-reference display.
The Preview box displays an image that shows an example of
the cross-referencing format being defined.
5 Select the display options.
TIP See the Reference topics for each cross-reference display
format to learn about the various display options.
6 If you selected to use the Table Format style, specify the table
style and table title. Select a table style from the list. The list
initially displays table styles from the active drawing and from
the table styles drawing. Click Browse to select a drawing with
the desired table style. Once selected, the table style is applied
to the Table Styles drawing.
364 | Chapter 6 Component Tools