2008

The Cross-Reference Check tool displays all associated and parent components
to the selected component.
Access:
Click the arrow on the Component Cross-Reference tool to access the Cross-
Reference Check tool.
From the Components menu, select Cross-Reference ➤ Cross-Reference Check.
A complete list of components is extracted from the project drawing set. The
component's tag is read, then all associated components are found and listed
in the dialog box. A bill of material check can be performed to see if the item's
description indicates that the quantity of contacts can be accommodated.
References
■ N.O. references: Lists the number of normally open contacts assigned to
the selected component.
■ N.C. references: Lists the number of normally closed contacts assigned to
the selected component.
■ Other references: Lists the number of child devices that are neither NO
or NC contacts. These may include pins of a connector, form C contacts,
or general devices that are being referenced.
■ Reference listing: Lists the type, number, location, installation, and
description text for the reference.
Parent Information
■ Manufacturer code: Lists the parent's associated manufacturing code (if
one exists).
■ Catalog number: Lists the parent's associated catalog number (if one exists).
■ Assembly code: Lists the parent's associated assembly code (if one exists).
■ Catalog Check: Creates a BOM description for the selected component
using the parent component's catalog number.
Comparing the description (2 available) with the contact count (3 required)
reveals a needed adjustment.
Check coil/contact count | 341