2008

NOTE This tool only operates on a component with 2-wire connections (for
example, limit switch contact symbol).
1 Click the arrow on the Scoot tool to access the Reverse/Flip
Component tool.
2 Click the Reverse/Flip Component tool.
3 Select whether to reverse or flip the component.
NOTE Components are reversed perpendicular to the axis formed
by the two wire connections or flipped along the axis of the wire
connection.
4 (Optional) Select to reverse or flip the graphics only.
Reverse/flip component
This tool reverses or flips selected component graphics and its associated
attributes.
NOTE This tool only operates on a component with 2-wire connections (for
example, limit switch contact symbol).
Access:
Click the arrow on the Scoot tool to access the Reverse/Flip Component tool.
From the Components menu, select Reverse/Flip Component.
Reverses the component graphics and the attributes perpendicular
to the axis formed by the two wire connections.
Reverse
Flips the component graphics and the attributes along the axis
of the wire connection (for example, from top-side of the wire
to the bottom and vice versa).
Flip
Reverse/flip components | 339