2008

Performs a Bill of Material check and displays the result. This is enabled
if the selected panel terminal contains catalog data.
Catalog Check
Displays the last symbol selected through the insert process. You can
clear the selection and go back through the insert process to select
Last symbol used
the schematic terminal symbol or you can automatically insert the
last symbol used by not making any changes.
Specifies the block insert scale. (1.0 = full)Scale
Changes the default drawing orientation.Rotate
Finds and inserts a schematic terminal for the highlighted panel ter-
minal. A query of the schematic_lookup.mdb file returns one or more
Insert
block names based on data that appears in the pick list. The results
are displayed in the Insert dialog box along with a short description
of each choice.
Specifies to pick a file for the insert. Select an existing AutoCAD
Electrical extracted panel terminal list file or extract a fresh copy of
panel component data from the current project's database.
Pick File
Manipulate components
You can manipulate components by moving, stretching, splitting, aligning,
or deleting them.
Delete components
The Delete Component command lets you remove the selected component.
The broken wires are repaired and any resulting instances of multiple wire
numbers now assigned to a single wire network are reconciled. In the case of
a child contact, AutoCAD Electrical looks for its parent on the current drawing
and removes the deleted contact from the parent's cross-reference annotation
(if the parent is on some other drawing then a separate run of the "X
330 | Chapter 6 Component Tools