2008

and panel, looking for a match. For each panel component, the routine tries
to find a matching schematic component based on tag, location, and
installation information. If a match is found, then it compares catalog
information looking for any discrepancies.
Access:
Click the arrow on the Insert Component tool to access the Insert Terminal
(Panel List) tool.
From the Components menu, select Insert Terminal (Panel List).
Specifies to export the data for the active drawing
or multiple drawings in the active project.
Extract terminal list for
Creates a comma-delimited file of the panel compon-
ent data. The extracted fie name is the same as the
Save list to external file
project by default (project_name.WD4). You can
display this data in spreadsheet format (open it in
comma-delimited "CSV" format), edit, and then save.
Uses a previous project's terminal list to create a
spreadsheet listing. After the initial extraction, a list
of terminals displays for selection.
Browse
Extracts only the information for panel terminals with
specific installation values. Once you pick Named
Installation Codes to extract
Installation, you can type the installation code in the
box or click List: Drawing or List: Project to select
from a list of used installation codes.
Extracts only the information for panel terminals with
specific location values. Once you pick Named Loca-
Location Codes to extract
tion, you can type the location code in the box or
click List: Drawing or List: Project to select from a list
of used location codes.
Panel components
This presents a list of all panel components extracted from the project's panel
layout drawings. As you pick an item from the pick list, the appropriate
schematic symbol is found and inserted in the drawing at your pick point.
326 | Chapter 6 Component Tools