2008

Component dialog box to make any additional changes to the new schematic
component.
1 Click the arrow on the Insert Component tool to access the
Insert Component (Panel List) tool.
2 Click the Insert Component (Panel List) tool.
NOTE Click the Insert Terminal (Panel List) tool to insert a panel
terminal.
3 Specify whether to extract the panel component/terminal list
for the active drawing or the active project.
4 Specify any installation or location codes to extract.
5 Click OK.
6 If you are extracting for the entire project, select which drawing
files to process, and click OK.
7 On the Panel Components (or Panel Terminals) dialog box,
select from the list of panel components/terminals to insert
the schematic symbol on the schematic drawing.
To modify the pick list so you can easily find the component
or terminal to select, click Sort List, Display, or Mark Existing.
8 Click Insert.
9 On the Insert dialog box, select which block name to insert
from the list.
If you want to insert an alternative block that is not in the list,
click Icon Menu to select a component from the icon menu
or click Copy Component to insert a component 'just like'
another existing component.
10 Click OK.
11 Select the insertion point on the drawing.
12 Make any changes to the inserted component in the Insert/Edit
Component dialog box and click OK.
324 | Chapter 6 Component Tools