2008

Access:
Defaults. In the Descriptions dialog box, click Language. Select the phrase and
language to edit and click OK.
Specifies whether to display the selected description text
in one line or across multiple lines. Examples of what the
description will look like appear next to the options.
1 Line, 2 Lines, 3 Lines
Overrides the selected description text. You can use the
default text or type modifications in the edit box. The "|"
character forces a line break.
Manual edit/override
Inserts selected description text into the component's first
description text line, leaving any existing text in lines 2 and
OK ➤ Description 1
3 as is. However, if you selected 2 Lines above and click
OK ➤ Description 1, the description text displays in de-
scription lines 1 and 2 in the Insert/Edit Component dialog
box.
Inserts selected description text into the component's
second description text line, leaving any existing text in
lines 1 and 3 as is.
OK ➤ Description 2
Inserts text starting at the component's second description
text line, leaving any existing text in the 1st line as is.
OK ➤ Description 2,3
NOTE These are useful for inserting description text in dual languages.
Pin numbers in use
Lists all the pins previously used in the project and the available pins that can
be assigned to a component. The component tag displays below the title bar
in the dialog box.
Access:
Click the Edit Component tool. Select the component to edit. In the Insert/Edit
Component dialog box, Pins section, click List.
306 | Chapter 6 Component Tools