2008

Electrical searches for the file in the standard search locations in the following
order:
1 User subdirectory (C:\Documents and Settings\{username}\Application.
Data\Autodesk\AutoCAD Electrical\{release #}\{country
code}\Support\User\)
2 Active project's .wdp file subdirectory
3 Symbol library paths defined for the active project
4 AutoCAD Electrical lookup subdirectory (C:\Documents and
Settings\{username}\My Documents\Acade {version}\AeData
5 AutoCAD Electrical support (C:\Program Files [(x86)]\Autodesk\Acade
{version}\Support\)
6 Current Directory
7 All paths defined under AutoCAD Options ➤ Files ➤ Support Files
Search Path
Click Setup to display the Spreadsheet to PLC I/O Utility Setup dialog box.
Use this to modify and save new setting configurations.
NOTE If you select the .wdi file to use after you make changes in the Spreadsheet
to PLC I/O Utility Setup dialog box, the settings in the .wdi file are used and the
setup changes are not applied.
Ladder Reference Numbering
Specifies the value for the beginning line reference number
for the first ladder of the first drawing. Leading zeros and
Start
embedded alpha characters are supported for line reference
numbering.
Defines if you want your line reference numbers to se-
quence by 1 (default) or by some other amount.
Index
Indicates whether to use the next sequential number for
the first ladder on each successive column or to use the
Column to column
specified value to skip for the next column's first ladder
reference.
260 | Chapter 5 PLC