2008

AutoCAD Block to insert
Specifies an AutoCAD block file to insert directly below the last I/O point
inserted parametrically. These are typically used for block files that represent
DIP switch settings and notes on how to configure the PLC module.
Autolisp file to run at module insertion time
Specifies an AutoCAD Lisp routine to run after the program executes the
parametric build of the PLC module. These are typically used for inserting
groups of symbols and wires, or modifying attributes on symbols to
accommodate a more custom PLC module build.
Module Box Dimensions
Opens a dialog box for defining the outer box dimensions of the module. The
box dimensions are calculated from the insertion point of the
parametrically-built PLC symbols.
Module Prompts
Opens a dialog box for defining up to nine prompts to be used at the time of
module insertion. You can specify the prompt number and the accompanying
text, or you can remove prompts from this dialog box.
Prompts at module insertion time
Use this to define up to nine prompts to be used at the time of module
insertion. You can specify the prompt number and the accompanying text,
or you can remove prompts from this dialog box.
Access:
Click the drop-down arrow on the Insert PLC (Parametric) tool to access the
PLC Database File Editor tool. Click the New Module or Module Specifications
button, then click the Module Prompts button.
From the Components menu, select Insert PLC Modules ➤ PLC Database File
Editor. Click the New Module or Module Specifications button, then click the
Module Prompts button.
You can define up to nine different prompts at insertion time.
■ To assign a prompt, select the prompt number from the list, enter the
prompt text in the edit box, and click Change.
Overview of the PLC database file | 245