2008

Inside the terminal grid control there are drop-down list boxes,
text boxes, and context menus that you can use to modify the
terminal information.
4 Select the terminal(s) to modify. You can select multiple fields
to edit at the same time by dragging your mouse across con-
tiguous fields or by holding down the Control key while select-
ing non-contiguous fields. You can also select multiple termin-
als if you want the terminals to carry the same information.
■ If you want to modify the terminals one at a time, either make your
changes on the PLC Database File Editor dialog box (using the drop-
down list boxes or text boxes) or select a single terminal (making sure
to select the entire row if you want to change more than one field),
click the right mouse button, and select Edit Terminal from the menu.
■ If you want to modify multiple terminals at the same time, select the
terminals, click the right mouse button, and select Edit Terminal from
the menu.
5 In the Select Terminal Information dialog box, make any
modifications to the selected terminal(s). Changes that you
make in this box will be applied to all of the selected terminals
in the terminal grid control.
6 Click OK to save your changes and return to the PLC Database
File Editor.
7 Click Done to save your changes and exit the dialog box or
click Done/Insert to save your changes and insert the PLC
module into your drawing.
PLC database file editor
232 | Chapter 5 PLC