2008

DescriptionAttribute
Optional attribute for the SHEET (%S) value assigned in the Drawing
Settings (12 characters maximum). Updates automatically with the
Update Signal References tool or Auto Wire Numbers tool.
SHEET
Optional attribute for the DWGNAM (%D) value assigned in the
Drawing Settings (40 characters maximum). Updates same as above.
DWGNAM
Attribute for wire connection where the "?" character is the wire
connection direction, same as above.
X?TERM01
Stand-Alone Source/Destination cross-reference symbols
These symbols are similar to the above except there is no wire connection
attribute and no WIRENO attribute. Default library symbol names are
HAxS1_REF.dwg, HAxD1_REF.dwg where "x" = style digit.
In-line wire labels or wire numbers
These symbols insert into a wire, break the wire, and reconnect at each end.
They carry a text label or wire number in the gap between the connected wire
ends. They symbols can dynamically adjust their gap to accommodate the
width of the in-line text. Default library symbol block names are HT0_*.dwg,
VT0_*.dwg.
DescriptionAttribute
Visible attribute for the text label (COLOR) or in-line wire text
(WIRENO) (24 characters maximum). This attribute is center or middle
COLOR
or WIRENO
justified and placed midway between the pair of wire connection at-
tributes listed below.
Pair of invisible wire connection attributes where the wires connect.
Connection is made to each attribute's origin point. The "?" character
X?TERM01
position in each attribute name identifies the wire connection direc-
tion:
■ 1: wire connects to the attribute from the right
■ 2: wire connects to the attribute from above
■ 4: wire connects to the attribute from the left
188 | Chapter 4 Symbol Libraries