2008

■ %S = Wire Size
■ %1-%5 = User 1 - User 5
Displays the AutoCAD dialog for Layer colors election.
The Select Color dialog box highlights the color
Color
corresponding to the wire type record. The default
color for new records is white.Undefined colors for
layers use the default color while creating the layer.
Multiple selection is allowed. All wire layers that have
been selected can be changed to the desired color.
Displays the AutoCAD dialog for linetype selec-
tion.This Select Linetype dialog box highlights the
Linetype
linetype corresponding to the wire type record. The
default linetype for new records is continuous. Un-
defined line types for layers use the default line type
while creating the layer. Multiple selection is allowed.
All wire layers that have been selected can be
changed to the desired linetype.
NOTE If you need special line types for constructing
P&ID or point to point diagrams, you need to load
the special line types from theacade.lin text file.
Displays the AutoCAD dialog for lineweight selec-
tion.The Lineweight dialog box highlights the line-
Lineweight
weight corresponding to the wire type record. The
default lineweight for new records is default. Un-
defined lineweights for layers should use the default
lineweight while creating the layer. Multiple selection
is allowed. All wire layers that have been selected can
be changed to the desired lineweight.
Displays the Layers for Line Wires dialog box for
specifying a layer name. You can also click Pick to
Add Existing Layer
select the layer name from the existing layer list that
consists of all the layers in the drawing inclusive of
the non-wire layers.
Only lines on pre-selected layers are processed as
wires. Enter a wire layer name in the dialog box. A
wildcard used in the name selects a group of layers
154 | Chapter 3 Drawing and Project Properties