2008

a few times before exiting.
8 On the Conversion toolbar, click the arrow on the Link
Schematic tool to access the Add Geometry tool.
9 Select the block to add the geometry to.
10 Pick or window select the geometry to associate to the template
block file.
11 Right-click to apply the selection.
12 Specify the insertion point.
Special explode
Use this tool to explode attributes and blocks to geometry and text entities
while maintaining the value previously defined in the attributes. You can take
advantage of the tagging tools to modify the text entities to attributes and
the linking tools to make various blocks.
NOTE Use AutoCAD Explode to convert Mtext to normal text for tagging and
linking.
Access:
On the Conversion toolbar, click the Special Explode tool.
Click Projects ➤ Conversion Tools ➤ Special Explode.
Select the block to explode into separate text entities and geometry.
Tag schematic
Use these tools to convert text entities into an attributed block. Through the
insertion of a template block, you have control over which attributes are
inserted and visible. All necessary attribute definitions are automatically placed.
Use tagging and linking tools | 1141