2008

Initial set-up
1 On the Conversion toolbar, click the Special Explode tool.
2 Explode any existing blocks.
This explodes attributes and blocks to geometry and text entit-
ies while maintaining the value previously defined in the at-
tribute.
3 On the Conversion toolbar, click the Change/Convert Wire
Type tool.
4 Select the wire layer from the grid to add wire lines to.
The selected wire layer highlights in blue to indicate which
layer is selected; the current wire layer highlights in gray.
5 Click Pick and select wire lines from the drawing to add to a
wire layer.
6 Click OK.
Tag components
1 On the Conversion toolbar, click the arrow on the Tag
Schematic tool to access any of the schematic tagging com-
mands.
2 Select the text entity to replace with the component TAG1
template block file.
The selected text string highlights indicating what has been
selected for conversion.
3 Right-click to apply the tag.
4 (Optional) Tag any other text entities with the proper block
file.
5 Right-click to exit the Tagging command. You may need to
right-click a few times before exiting.
Use tagging and linking tools | 1139