2008

If a device selected from the schematic extract list has any associated secondary
contacts, these contacts are inserted along with the primary component. Use
the options within the Device Spacing area to define how you want the first
component of each device inserted. Use the options within the Components
for Selected Device area to define how you want to insert all the components
that are associated with a selected Device Tag.
Access:
Run any of the component or footprint insertion from list commands (such as
Components ➤ Insert Component (Panel List)). Select the drawings to process
and click OK. Select multiple components or terminals to insert and click Insert.
The components display in the list box in the order they are inserted. To
modify the order, select an item from the list, then select Move Up or Move
Down in the list.
Specifies the location for each component or terminal
using the Insert dialog box.
Prompt for each location
(for component insertion only) Specifies the location
for all of the components. Specify the insertion points
Fence Insertion
on the drawing and right-click. The Insert/Edit dialog
box displays. Once you click OK on the Insert/Edit
dialog box, the component inserts on the drawing.
Specifies the location for the first component (or
terminal). The values in the X-distance and Y-distance
Use uniform spacing
boxes are used to calculate the insertion coordinates
for the remaining components (or terminals).
NOTE You can set the default values for the X-dis-
tance and Y-distance in the Panel Configuration dia-
log box.
(for footprint insertion only) Suppresses the edit
dialog box that normally appears each time a com-
Suppress edit dialog and prompts
ponent (or terminal) is inserted. The Panel Insert/Edit
dialog box displays after each insert if this option is
not selected.
Select component data from a spreadsheet | 1073