2008

paths (or you can enter the full path). If the new record is similar to
an existing record, highlight the existing record before you click Add.
Opens a dialog box for editing an existing record. Highlight the record
and click Edit. Modify the record in the displayed dialog box.
Edit
Removes an existing record.Delete
Schematic terminals list panel layout insert
This report provides error checking between the schematic terminals and
panel layout terminals. The program looks at the selected terminals, both
schematic and panel, looking for a match in the project. For each schematic
terminal selected, it tries to find a matching panel terminal based on tag,
location, and installation information. If a match is found, then it compares
catalog information, and description information, looking for any
discrepancies. The program then looks at each selected panel terminal looking
for a matching schematic terminal in the same way.
Access:
Click the arrow on the Insert Footprint tool to access the Insert Terminal
(Schematic List) tool.
From the Panel Layout menu, select Insert Terminal (Schematic List).
If you start with panel layouts before you create schematics, schematic pick
list data is not available to automate footprint selection and annotation. If
you list your panel components in a spreadsheet and in a format that AutoCAD
Electrical expects, this spreadsheet data can become your schematic pick list
data for panel layout.
Extract component list for
Specifies to export the data for the active drawing or the entire project.
Save list to external file
Uses a previous project's schematics to create a component or terminal
spreadsheet listing. This can help drive the new project's panel layout.
AutoCAD Electrical creates a comma-delimited file of the schematic data. You
can display this data in spreadsheet format (open it in comma-delimited "CSV"
format), edit, and then save back out.
1056 | Chapter 15 Panel Layout