2008

2 In the Create/Edit Wire Type dialog box, click Add Existing Layer to add
the wire line layers in use in the schematic to the list to be recognized as
layers by AutoCAD Electrical.
3 In the Layers for Line Wires dialog box, enter the layer name or pick a
wire from the existing layer list.
A wildcard used in the name selects a group of layers. For example, RED_*
selects all layers that begin with "RED_."
4 Click OK.
5 In the Create/Edit Wire Type dialog box, click OK.
NOTE You can also change layer properties using the Project Manager tool. In
the Project Manager, right-click on the project name and select Properties. In the
Drawing Format tab, Layers section, click Define.
Set unique wire IDs
You need to assign each wire a unique wire ID or number before they can be
imported into another application.
1 Click the Project Manager tool.
2 In the project listing, right-click the project name, and select
Properties.
3 In the Project Properties dialog box, click the Wire Numbers
tab.
4 In the Wire Number Options section, select On per Wire Basis.
5 Click OK.
Fix wire numbering
You must fix the wire numbers so they stay the same for subsequent imports
into Autodesk Inventor Professional Cable and Harness. Do this after the wire
numbers have been assigned. Use any of the following procedures to fix wire
numbers.
Set up for export to Autodesk Inventor Professional Cable & Harness | 1017