2008

Report format file setup - schematic wire label
The options are saved in the format file after you click OK on the dialog boxes.
If you are working in an unnamed format file, you must save the data after
you click Done to keep the changes you made.
Access:
Click the arrow on the Schematic Reports tool to access the Report Format File
Setup tool. Select Wire Label from the Schematic report list.
From the Projects menu, select Reports ➤ Report Format File Setup. Select
Wire Label from the Schematic report list.
Report Filter
Displays the wire label for all wires, except
those that are part of a cable.
Display Wire Label
Displays the cable labels in the specified
format.
Display Cable Label
Change Report Fields
Changes which data fields are reported and the order in which they appear.
You can change the justification of any column and the column label.
There are two categories that you can change the report format for: wire label
or cable label. Once you modify the report format, you can save it for future
use. The wire and cable label formats are stored in the same file.
Label Quantity per Connection
Specifies the quantity of wire labels or cable labels. Wire labels are generated
for every wire connection while cable labels are generated once for every cable.
Number of Columns to Display
Arranges the wire labels in the specified number of columns.
Horizontal/Vertical Arrangement
Arranges the wire label horizontally or vertically across the columns.
Overview of format files | 989