2005

Table Of Contents

Modifying Attributes | 77

7 In the Schematics Components (current project) dialog box, notice the

master control relay still needs to be placed.

8 Click the Close button.

Modifying Attributes

You can align the inserted schematic component footprints with existing

footprints.

To align footprints vertically

1 Click the drop-down arrow on the Scoot tool to access the Align tool.

Menu Components ➤ Align

2 Respond to the prompts as follows:

Select component to align with (Horizontal/<Vertical>): Enter V, press ENTER

Select component to align with (Horizontal/<Vertical>):

Select the power on button on the top, left of the layout (1)

Select objects:

Select the three components that were just inserted (2-4), right-click

The components are aligned vertically.

Use the same procedure to align the schematic component footprints

horizontally.