2005

Inserting Panel Components | 65
4 Click the drop-down arrow on the Insert Footprint tool to access the Insert
Footprint (Schematic List) tool.
Menu Panel Layout ➤ Insert Footprint (Schematic List)
5 In the Schematic Component List Panel Layout Insert dialog box, verify the
following settings, and then click OK.
Extract component list for: Project
Location Codes to extract: All
Click OK.
6 In the Schematic Components Panel Layout list: select drawings to process
dialog box, select demo04.dwg.
7 Click the Process v button, verify demo04.dwg appears in the Drawing to
Process section of the dialog box, and then click OK.