2005

Deleting Wire Numbers | 61
4 In the Wire Tagging: Select drawings to process dialog box, Project Drawing
List section, hold the SHIFT key and select demo03.dwg and demo04.dwg, and
then click the Process v button.
5 Verify the selected drawings are listed in the Drawings to Process section of
the Wire Tagging: Select drawings to process dialog box: demo03.dwg and
demo04.
Click OK.
6 In the Create Zip back-up? dialog box, click the No backup button.
7 Click OK in the QSAVE dialog box.
Wire numbers are processed for the selected drawings.
Deleting Wire Numbers
You can use the Delete Wire Numbers tool to select a wire number or to pick
on any wire of the network.
To delete a wire number
1 Click the Delete Wire Number tool.
Menu Wires ➤ Delete Wire Number
2 Respond the prompt as follows:
Select objects: Enter all, press ENTER
The wires in the network change to dashed lines, represented the wires from
which the wire numbers will be erased.
3 Press ENTER again to erase the wire numbers.
This is the end of this tutorial chapter.