2005

Inserting Wire Numbers | 59
To insert wire numbers automatically
1 Verify that demo04.dwg is the current drawing.
2 Zoom the top portion of the wire network on the left side of the drawing.
3 Click the Automatic Wire Numbers tool.
Menu Wires ➤ Automatic Wire Numbers
4 In the Sheet 4 - Wire Tagging dialog box, click the Pick Individual Wires button.
5 Respond to the prompts as follows:
Select objects: Select the wire segment between the two push buttons on line
reference 403 (1), right-click
The wire number is placed.
To add wire numbers to the entire drawing
1 Click the Automatic Wire Numbers tool.
Menu Wires ➤ Automatic Wire Numbers
2 In the Sheet 4 - Wire Tagging dialog box, click the Drawing-wide button.
Wire numbers are assigned to each segment in your drawing.
1