2005

50 | Chapter 5 Wire Numbers
About Wire Numbers
AutoCAD
®
Electrical assigns a unique wire number to each wire network. A
wire network consists of one or more wires that are electrically connected.
Attaching Source Signal Arrows
You can attach a source signal to a wire segment of a wire network. This
enables the wire number assigned to the network to jump and continue to
another network on the current drawing or on one or more project drawings.
To attach a source signal arrow
1 Click the Project New/Existing tool.
Menu Projects ➤ Project ➤ Project New/Existing
2 Double-click demo03.dwg to open drawing.
3 In the Drawing Modification dialog box, click the Save Changes button to
save the changes to the current drawing.
4 Click the drop-down arrow on the Source Destination Signals tool to access
the Source Signal Arrow tool.
Menu Wires ➤ Signal References ➤ Source Signal Arrow