2005

32 | Chapter 3 Drawings
To insert three-phase bus wiring
1 Click the drop-down arrow on the Insert Wire tool to access the Insert 3
Phase Wire tool.
Menu Wires ➤ Insert 3 Phase Wire
2 In the 3-Phase Bus dialog box, verify the following default values are set:
Horizontal: Spacing: 0.7500
Vertical: Spacing: 0.5000
Starting at: component or another bus
Click OK.
3 Respond to the prompts as follows:
Select component or bus for 3 phase wire:
Select the first vertical wire at line reference 1022 and drag across other wires
Select component or bus for 3 phase wire: to:
Click to place the 3 phase wire