2005

Inserting Components | 21
6 In the All Locations - Drawing dialog box, select OPSTA3, and then click OK.
7 In the Insert/Edit Component dialog box, click OK.
Inserting System Reset Buttons
The last component you insert is the system reset button.
To insert a system reset button
1 Click the Insert Component tool.
Menu Components ➤ Insert Component
2 In the Insert Component: JIC Schematic Symbols dialog box, click the Push
Buttons button.
3 In the JIC: Push Buttons dialog box, click the Push Button N.O.
4 Respond to the prompts as follows:
Specify insertion point:
Position the push button on the middle of the wire at line reference 403 (5)
5