2005

16 | Chapter 2 Schematic Components
To insert a child component
1 Click the Insert Component tool.
Menu Components ➤ Insert Component
2 In the Insert Component: JIC Schematic Symbols dialog box, click the Relays
and Contacts button.
3 In the JIC: Relays and Contacts dialog box, click the Relay N.O. Contact
button.
4 Respond to the prompts as follows:
Specify insertion point:
Position the cursor on the wire at line reference 404 near the hot wire and click (2)
5 In the Insert/Edit Child Component dialog box, Component Tag section,
click the Drawing button.
6 In the Current Drawing list for FAMILY=”CR” dialog box, select:
MCAB5 CR403 MASTER CONTROL RELAY
Click OK.
2
X