2009

12 Add a cut line to the detail:
■ If necessary, on the application status bar, click to turn on Ortho Mode.
■ On the Getting_Started tool palette, click the Cut Line tool.
■ Specify a point to the left of the second CMU [Block] in the detail, but within the extents of
the model space view.
■ Move the cursor to the right side of the detail, and specify an endpoint for the cut line.
■ Select a point above the detail components to specify the cut line extents.
The detail is now properly framed and is ready to be annotated.
13 Turn off the display of the keynote field background:
■ Click Format menu ➤ Options.
■ Click the User Preferences tab.
■ Under Fields, clear Display background of fields.
■ Click OK.
14 Add keynotes to the detail components:
■ On the Getting_Started tool palette, click the Keynote (Straight Leader) tool.
■ Select the top brick in the brick course as the component to keynote, and select any point
on the brick.
■ Move the cursor to the right, and click to select the second point of the leader.
■ Press ENTER twice to place the keynote.
■ Using the same method, add keynotes to the other components in the detail.
To repeat the keynoting command, press the SPACEBAR. To keep multiple keynotes aligned,
align the second point of each consecutive keynote leader with left edge of the keynote above
it.
■ Click File menu ➤ Save.
15 Create a presentation sheet on which to place the detail and other project views:
■ On the Project Navigator, click the Sheets tab.
■ Under Getting Started, expand Architectural.
Detailing Your Design | 41