2009

■ Select the lower left endpoint of the wall board that you just placed, enter y (Y flip), press
ENTER, move the cursor up, and select the top left endpoint of the vertical hat channel.
■ Press ESC.
10 Detach the section view that you referenced to create the detail:
■ On the drawing window status bar, click (Manage Xrefs).
■ On the External References palette, under File References, select Building Section.
■ Right-click, and click Detach.
■ Close the External References palette.
■ Save the Window Detail file.
11 Create a new model space view for the detail with an appropriate scale:
■ On the Project Navigator, under Views, select Window Detail, right-click, and click New
Model Space View.
■ On the Add Model Space View worksheet, click the Name field, and enter Window
Detail@Head.
■ For Scale, select 1 1/2'' = 1'0'' [1:10].
■ On the right side of the worksheet, click (Define View Window), and draw a window
selection around the detail.
■ In the Add Model Space worksheet, click OK.
■ In the Project Navigator, under Window Detail, open the new Window Detail@Head view.
40 | Chapter 1 Getting Started