2009

■ Drag the grip down until the dynamic dimensions display a width of 6' [1800 mm], and click
to resize the window.
■ With the window still selected, on the Properties palette, for Height, enter 6' [1800 mm].
■ Press ESC to end the command.
8 Change the size of the remaining windows:
■ Select one of the other windows on the floor plan, right-click, and click Select Similar.
■ On the Properties palette, for Standard sizes, select 6'-0'' X 6'-0'' [1800 mm X 1800 mm].
■ Press ESC to end the command.
9 Save and close the 01 Floor construct.
10 View the changes in the 01 Plan view.
■ Click Window menu ➤ 01 Plan.
■ At the lower right corner of the screen, click the blue link in the information bubble to reload
the changes that you made in the 01 Floor construct to the current view. Notice that the
windows are resized.
11 Update the window schedule, and view the new sizes in the schedule.
12 Save and close 01 Plan.
Creating a Section
In this exercise, you create a section through the building. Before you can create the section, you must create
the rest of the building geometry. Construct drawings that include the floor slabs, elevator shaft, and curtain
wall entry are provided for you, but you create the 02-04 Floor constructs and reference the restroom elements
onto the 01-04 Floor constructs.
Creating a Section | 31