2009

8 Save 01 Plan, and leave it open.
Making Floor Plan Revisions
In this exercise, you make several revisions to the 01 Floor construct. You take advantage of the many features
of AutoCAD Architecture that make it easy to adjust any of the objects in your design. To edit the objects
on a floor plan, you can change object properties, use object grips, or use dynamic dimensions.
1 On the Constructs tab of the Project Navigator, double-click the 01 Floor construct.
The interior doors on the floor plan, Hinged - Single - Full Lite, contain a pane of glass. This
type of door is not suitable for either the storage room or the restroom. Rather than changing
only the storage and restroom doors, you replace all the interior doors on the floor plan with a
solid door type.
2 Change the style of one of the interior doors on the floor plan:
■ On the Getting_Started tool palette, right-click the Hinged - Single door tool, and click Apply
Tool Properties to ➤ Door.
■ Select an interior door on the floor plan, and press ENTER.
■ On the Properties palette, under General, for Style, view the new Hinged - Single style that
is applied to the door.
■ Press ESC to end the command.
3 Change the style of the remaining interior doors:
■ Select another door that has the Hinged - Single - Full Lite style applied to it, right-click, and
click Select Similar.
■ On the Properties palette, under General, for Style, select Hinged - Single.
■ Press ESC to end the command.
28 | Chapter 1 Getting Started