2009

■ Press ENTER to place the schedule at the current drawing scale.
■ Zoom to a line on the schedule, and view the door information.
6 Tag the windows on the floor plan view to include them in a separate window schedule:
■ On the Getting_Started tool palette, click the Window Tag tool.
■ Select the bottom window in the left exterior wall of the conference room on the lower left
corner of the plan, move the cursor slightly to the left of the wall, and click to place the tag.
■ In the Edit Property Set Data dialog, click OK.
■ On the command line, enter m, and tag the remaining windows.
If necessary, adjust the position of some of the window tags so they are located on the outside
of the walls.
7 Create the window schedule:
■ On the Getting_Started tool palette, click the Window Schedule tool.
■ Using the same method used previously, create the window schedule.
Creating Schedules | 27