2009

■ On the application status bar, click to turn on Ortho Mode, move the cursor directly
up, and select a point on the inside of the top horizontal stairway wall, perpendicular to the
one you just selected.
■ Press ESC to end the stair command, and select the stair.
■ On the application status bar, click to turn on object snap.
■ On the Modify toolbar, click (Move).
■ Select the upper left endpoint of the landing, and select the inside corner of the stairwell to
position of the stair in the stairway, as shown:
■ Press ESC to end the command.
13 Using the same method, place another stair in the stairway in the upper right portion of the
building.
Laying Out a Floor Plan | 23